This tablesaw has been packed with as many features as possible, with the aim of achieving the best quality and value for money on the market!
The specially designed motor features a 2300w input, with 1850w (2.5HP) true output providing plenty of power, but all delivered through a standard 10amp power supply - no specific wiring is required in your workshop!
Safety is a key focus for Carbatec, so a left tilting blade means it tilts away from the fence. What does this achieve? It aids in preventing offcut pieces becoming trapped when cutting at angles other than 90°. The riving knife moves up and down with the blade, so when fitted with the included low profile knife, it is always below the level of the blade allowing for trenching style cuts, yet is there for additional safety against kickback caused by a closing cut pinching the back of the blade.
The included overhead guard is clear providing great visibility during the cutting process. Further, this highly efficient guard offers suction right where the dust is being created - all channeled through an integrated overhead piped dust system that comes standard with the machine. Inside the cabinet is shrouded and piped to a single rear dust outlet. That single 4" dust port connects to your dust extractor (not included!) and provides simultaneous dust extraction from above and below the table with exceptional efficiency! No separate Shop-Vac or specific reducers required.
A Magnetic NVR Switch is located at the front of the saw and is easily accessible to the operator. The NVR (no volt release) magnetic switching prevents unintentional restart of the machine in the event of power failure when power is restored. It also features a locking mushroom stop.
A fully enclosed cabinet base makes for a stable machine, housing the heavy duty saw chassis and trunnions with directed dust control as mentioned. It also features a built-in mobile base with foot pedal operation should you need to move this machine around your workshop.
This model features a traditional Heavy Duty Steel "Biesemeier Style T-Glide" Lever Lock Fence with HDPE faces that offer little resistance for the workpiece. 30” steel rails (not alloy) give a cut capacity of 762mm to the right of the blade. The fence itself is fully adjustable for parallelism to the table, the blade and in resistance to travel meaning you can tweak it to suit your preference perfectly, while a magnified hairline provides easy to read measurements.
The table is finely ground cast iron, as are the left and right extension wings. These extension wings feature grub screw adjustment for leveling to the main table. The additional right extension infill is solid phenolic resin for stability and longevity.
Finally, we've also included a Premium Mitre gauge setup as standard! Fitting into the standard 3/4" x 3/8" T-Slots, this unit features positive locks at 5 degree intervals, on oversized comfortable rubber enclosed handle and an adjustable alloy extruded fence with flip stop - gone is the cheap basic plastic unit of yesteryear!
Fitting a standard 10" blade (not included) provides 76mm of cutting depth at 90 degrees, on a standard 5/8" arbor. The machine is fully dado capable with a maximum 20.6mm width of cut and dado insert included.
Cast Iron Table Depth - 685mm
Table Width with Extensions and Solid Phenolic Insert - 1360mm
Features
Specifications
Warranty 2 Years
Motor 1850W (2.5HP) output, 10amp Plug
Switch Type Magnetic NVR
Blade Diameter 254mm (10") NOT included
Arbor Diameter 15.875mm (5/8")
Maximum Cut At 45° 52mm (2")
Maximum Cut At 90° 76mm (3")
Blade Guard Transparent with point-of-cut dust channel
Blade Tilt Left
Dado Capable Yes to 20.6mm
Dust Port/s 100mm (4")
Maximum Rip Capacity 762mm
Table Height 888mm (35")
Weight 186kg (Gross)
Table Dimensions 1360 x 685mm with cast wings and fence infill
Footprint 1580 x 1175 x 1235mm (Width/Length/Height)
Delivery
We can send Australia wide!
Machines under 30kg & easily handled by a single person can usually be sent by courier (no PO Boxes or Parcel Lockers).
Machines weighing more than 30kg must be placed on a skid or pallet.
If a product is over 30kg you can:
- Pick it up from the closest courier depot.
- Pay a tailgate drop fee for delivery to door.
For a heavy item quote, please contact us below!
Any size, any colour buy any 5 Thermelt bags & get 1 free! No code needed, discount applied at checkout.
Health of Mind Art resins are made to the highest quality right here in Australia!
You asked, we answered. Odie's is back in Australia.
Based on natural oils & waxes, the oil penetrates into the wood surface, protecting the wood from deep within. The wood remains naturally beautiful, protected and durable.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
