Skip to content

6L Pure Tough

Original price $293.00 - Original price $293.00
Original price $293.00
$293.00 - $293.00
Current price $293.00
Earn 1 Point on this purchase. Learn more
Availability: LOW STOCK

Health Of Mind Pure Tough is an Australian Made Epoxy Resin system that provides a tough epoxy coating like the US made Stonecoat.

Pure Tough is a high gloss, low viscosity, self-levelling, solvent free two-pack coating designed as a hard-wearing top coat for timber, furniture, or art applications. Pure Tough achieves a high build in a single coat and provides an extremely durable, scratch resistant finish.

  • Mix ratio: 2 parts A to 1 part B (vol)
  • Work time: 15-30 minutes
  • Film Thickness: 0.5 to 1mm per coat
  • Coverage Rate: 0.5 to 1.0m2/L
  • Recoat: 24-48hrs
  • Light use: 36 hours
  • Full Cure: 7 Days
  • Colour Stability: Suitable for internal
  • Shore D hardness: 75
  • VOC content: 0 g/L
  • Application temperature: 10-35 degrees
  • Heat resistant over 150 degrees 
  • Do not apply butane torches , heat guns only 

Substrates should be thoroughly sanded or ground to provide a keyed surface.  If applying over existing coatings, adhesion should be tested by preparation of a small test area. Remove all potential contaminants. It is generally recommended that the surface to be coated be elevated from the work area to allow the coating to drip freely off the sides. Ensure tape and protective sheeting is used to protect work area. Ensure that the surface is level.

PURE TOUGH is designed to be applied by pouring or spreading to achieve a high build. Apply via brush or spreader. Material can be applied thinly via roller however multiple coatings will be required to achieve the desired result. If bubbles occur, they can be easily broken via torching or use of a heat gun – bubbles should be removed within 30 minutes of application.

Pure Tough is supplied in kits containing both Part A & Part B.

SDS available on request. Please email: for a copy.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare